Fritz!Box — A Few Tips
Admin Console & Management
- The Fritz!Box admin web interface does not support some old browsers, such as Internet Explorer 9. Additionally, some features may not work properly with Internet Explorer. We have found Firefox is the best browser to use.
- When configuring for ADSL, be sure that Annex A is selected under Internet → DSL Information → Line Settings.
vDSL / FTTN
- When configuring for Fibre-to-the-Node (FttN) vDSL on the Australian National Broadband Network (NBN), be sure that Annex B is selected under Internet → DSL Information → Line Settings.
- Change the Internet Service Provider to Other Internet Service Provider. Then re-enter the PPPoE details. Otherwise it will not negotiate PPPoE with your provider properly.
- Fritz!Box only supports CHAP for PPPoE connections, so will be unable to connect to any ISP which enforces MS-CHAP/v2.
NBN / VLAN
- Some NBN services require VLAN set to 2 under Internet → Account Information → choose Internet Service Provider = Other Internet Service Provider:
- If using a non-DSL service, set the downstream/upstream speeds accurately under Internet → Account Information → Connection Settings, as the Fritz!Box will throttle traffic according to these settings. On xDSL services, the Fritz!Box knows the sync speeds automatically.
- Check that the LAN ports are configured as required under Home Network → Home Network Overview → Network Settings. By default they may be in 100Mbps/power saving (Green) mode. Any device which requires the best throughput should be set to Power Mode (1Gbps). Any ports with switches/hubs attached should be set to Power Mode.
Additionally, any service which requires a reliable connection should be attached to a port in Power Mode. For example, a server hosting Remote Desktop Services. Although the outgoing/incoming traffic may not exceed 100Mbps because it is travelling over a slower Internet connection, the power saving functions may cause it to drop connections.
- When disabling the DHCP Server function, be sure to disable both DHCPv4 and DHCPv6 functions under Home Network → Home Network Overview → Network Settings → IP Addresses. Otherwise the DHCP Server service running on a Windows server will not work.
- If you've lost connectivity to the device or the PC has selected an APIPA address, it can always be accessed at http://169.254.1.1.
- If making outbound telephone (VOIP) calls seems to fail intermittently, check the dialling prefixes under Telephony → Telephone Numbers. Click Edit next to the phone service, and under Telephone Number Format, ensure Country Code and Area Code are set to None.
- To direct incoming calls to the Answering Machine when the line is busy, create a Call Diversion rule, use the number of the answering machine as the destination (eg 600 for Answering Machine 1, 601 for Answering Machine 2 etc), and set the type of diversion to When busy.
Verified Compatible ISP Scenarios
- Internode FTTN NBN (vDSL)
- Internode FTTC NBN (but does not support NBN Phone)
- Uniti Wireless (Fixed Wireless)
- Beam Barossa (Fixed Wireless — requires CHAP authentication enabled by ISP)
Copyright © 1996-2020 Cadzow TECH Pty. Ltd. All rights reserved.
Question/comment about this page? Please email firstname.lastname@example.org